Welcome to Shenzhen Sky-ever Technology co.,ltd
Mail:jenny@sky-ever.com

Working Time
Monday~Saturday
NO.22,New Guanlan street,Longhua New District,Shenzhen,China

High conductive soft silicone rubber thermal pad with 2w~4w

Item No.: HTP
Hight conductive 2~4w/m-k
INQUIRY
Description

         HTP series are thermal conductive silicone pad with high thermal conductivity. The raw material is from Japan Electric Denka (Denka) which made of high thermal conductivity spherical alumina powder and Dow Corning polymer, which is a cost-effective thermal filler.Natural micro-viscosity and softness of surface is good for filling the air gap to complete the heat transfer between the heat source and heat sink improving the thermal conductivity It is very suitable for high performance requirements and is a very good thermal interface materials.


 

Test item Test method Unit HTP200 HTP300 HTP400
Color     Blue Grey/blue Light blue
Thickness ASTM D374 mm 0.3~10 0.3~10 0.3~10
Specific gravity ASTM D792 g/cm3 3.0 3.1 3.4
Hardness ASTM D2240 Shore C 20~30 30~40 30~40
Tensile strength ASTM D412 kg/cm2 55 55 55
Continuous use temperature EN344

-40~+200 -40~+200 -40~+200
Voltage endurance ASTM D149 kv/mm >4.0 >4.0 >4.0
Flame rating UL-94   V-0 V-0 V-0
Thermal conductivity ASTM D5470 w/m-k 2.0 3.0 4.0


Tips:

1.The original size is 200mmx400mm, 300mmx400mm and it is decided by the machine.However, it can die-cut to any size by machine again. So we can offer you the different size you need.

2.As for color, the general is grey and blue.If you need other color,please tell me.

3.As for thermal conductivity,if you need others,also please let me know.

 



Features and advantages

1.High thermal conductivity,low thermal resistance;
2. Soft and flexible to reduce the thermal resistance of interface;
3. High electrical insulation,protecting the sensitive electronic components;
4. ROHS UL compliant

 


Usage

 

Step 1

Clear the surface where you are going to paste the thermal pad; 



 

 

Step2

Tear the protective film of one side and remember do not tear the protective film of both sides in the same time to reduce the contact times and scare of the thermal pad avoiding the damage of thermal pad stickiness and thermal conductivity. 

 



Step3

Paste the side without protective film on the products, then tear the other side protective film, then install your electronic components on the thermal pad. After installation, press slightly and let it stay for a while to ensure the thermal pad fixed well. 


 



Application 





        Graphic/video card/memory           High-speed hard disk driver                    Memory module

         South and North Bridge

 




    Heat sink of micro heat tube              Control device of car engine                      Mobile phone 

     



      Portable electronic devices            New energy car electronic device                  Led lighting