Welcome to Shenzhen Sky-ever Technology co.,ltd
Mail:jenny@sky-ever.com

Working Time
Monday~Saturday
NO.22,New Guanlan street,Longhua New District,Shenzhen,China
PRODUCTS

Fiberglass coated silicone thermal conductive padconductive

Item No.: TPF
Fiberglass reinforced
INQUIRY
Description

 

      TPF series are thermal interface material which coating thermal conductive polymer on a layer of glass fiber.The stickiness of the material is slightly weakness for easy procession. And insulation and tear resistance are also better. Its stickiness and flexibility, even in extremely rough and very uneven surface,also can bring a good thermal filling effect.

 

Test item Test method Unit TPF150 TPF200 TPF300
Color     Light blue Blue Grey
Thickness ASTM D374 mm 0.3~10 0.3~10 0.3~10
Specific gravity ASTM D792 g/cm3 1.8 2.8 3.1
Hardness ASTM D2240 Shore C 15~35 15~35 15~35
Continuous use temperature EN344

-40~+200 -40~+200 -40~+200
Voltage endurance ASTM D149 kv/mm >5.0 >5.0 >5.0
Flame rating UL-94   V-0 V-0 V-0
Thermal conductivity ASTM D5470 w/m-k 1.5 2.0 3.0


Tips:

1.The original size is 200mmx400mm, 300mmx400mm and it is decided by the machine.However, it can die-cut to any size by machine again. So we can offer you the different size you need.

2.As for color, the general is grey and white.If you need other color,please tell me.

3.As for thermal conductivity,if you need others,also please let me know.

 



Features and advantages


1.Glassfiber substrate,anti-puncture,shear and tear resistance;

2.Only the side without fiberglass has stickiness,easy installation;

3.Low hardness,strong electrical insulation




 

Usage

 

Step 1

Clear the surface where you are going to paste the thermal pad; 



 

 

Step2

Tear the protective film of one side and remember do not tear the protective film of both sides in the same time to reduce the contact times and scare of the thermal pad avoiding the damage of thermal pad stickiness and thermal conductivity. 

 



Step3

Paste the side without protective film on the products, then tear the other side protective film, then install your electronic components on the thermal pad. After installation, press slightly and let it stay for a while to ensure the thermal pad fixed well. 


 



Application 





        Graphic/video card/memory           High-speed hard disk driver                    Memory module

         South and North Bridge

 




    Heat sink of micro heat tube              Control device of car engine                      Mobile phone 

     



      Portable electronic devices            New energy car electronic device                  Led lighting